Dual TDS Controller (PS-200)

We are providing Dual TDS Controller (PS-200) to our clients. Install the Dual TDS Controller to constantly monitor TDS levels of water produced by a high-output system. Immediately know if the TDS levels rise above an acceptable level. FEATURES * Monitors and controls TDS levels of two water lines (e.g., feed water and product water) for high output commercial systems. Large, bright L.E.D. display. SPECIFICATIONS * Range: 0 - 999ppm * Accuracy: A 2% * Conversion Factor: NaCl (avg. 0.5) * Resolution: 1 PPM * ATC: Yes (1 - 65 degrees Celsius) * Calibration: Adjustable * Setting: Controlled by on-screen up/down buttons * Relay Control: The unit will open or close a circuit via dry contacts when the ppm level (out line/line 2 only)reaches or exceeds the control setting (simple switch). It can be used to control a pump, solenoid valve or other device. (In line/Line 1 does not have a control function) * Relay Voltage: 5V (simple switch) * Alarm: Optional steady beep for Out line/Line 2 (set by user) * Display: Bright 5/8" L.E.D. display * 2 Probes: 1/2" bushing, 3 meter (9.8 ft) shielded cable * Power supply: AC 110V / AC 220V * Dimensions: 7.2 x 7.2 x 10.2 cm (2.8 x 2.8 x 4 in.) * Monitor Weight: 476 g (1 lb