Mineral Fiber Ceiling Board Production Line

Product Description

Grade : Top Control : Simple Operation : Stable Noise Level : Low Major equipment:- 1. Batching system: Put the well-matched ore raw materials (paraffin, acetic acid, sepiolite, starch, etc.) into the mixing tank, place the water, put the beaten mineral wool, and stir. 2. Forming line: Slurry pump is used to pump the mineral wool slurry to the forming water line to make the mixture empty, flattened, cut, and formed on the forming water line. 3. Cutting machine. 4. Drying line: The wet board conveyer will put the formed mineral wool board into the hydraulic machine to dry 5. Spray coating: The well-cut mineral wool board is sprayed with a sprayer and then dried in a drying line. The dried mineral wool board gin is sprayed again and put into the drying line again. 6. Embossing: Embossing roller, driven roller, rack. 7. Trimming: Trimming the dried mineral wool board with a cutting machine. 8. Packaging and storage: Acceptance, packaging, and storage of the certified mineral wool board.