Prefab House

We are a leading organization for manufacturing a exporting PreFab House to our customers. a cSPECIFICATION OF BWP BOARD MODEL POOJAa S PANEL SYSTEM (MODEL FRAME-WORK) Framework of Floor Base: - The Framework of platform shall be made of MS RHS Steel pipea s (50x25 mm of 16guage) grid of 600x600mm duly primered and painted. Floor Platform: - The Floor shall be made by mainly Water Resistant plyboard (19mm). The platform & floor will be treated with wood preservatives & anti-termite chemicals. Level above ground: - The entire structure shall be raised above the ground by 6a to 8a or more using steel supports (iron joists). Frame work of Walls: - The Framework of walls shall be made out of combination of MS RHS Pipe (50x25mm of 16guage)/ slotted angles (40x40x2.5m) and wooden battens 75mmx40mm wherever required. Walls (Exterior): - The cladding of exterior walls shall be made out of textured coated Water Resistant plyboard (6mm). Walls (Interior): - The cladding of Interior walls shall be made out of Water-resistant plyboard 6mm with insulation of thermocole. Roof: - The roof will also be made in panels like walls with GI Corrugated Sheets (0.46 thick)/ mounted on rooftop. Insulated with thermocole (50m thick/ 16D EP) is sandwiched in two layers of cladding. The lower portion of the panel forms the ceiling of cabin. The roof being single/ double slopped will remain 100% leak proof. Insulation: - 50mm/ 16D EP thermocole is used for walls & roof.