Cover Material:
Cold Rolled Steel
Thickness:
1.6 TO 3.0 Millimeter (mm)
Rated Operation Voltage:
440V
Rated Current:
200A Ampere (amp)
Rated Insulation Voltage:
8 KV
Way:
SINGLE DOOR ONE WAY
Base Material:
Cold Rolled Steel
Protection Level:
IP55
Product Type:
Electric Panel
Material:
Cold Rolled Steel
Surface Finish:
Powder Coated
Standard:
INDUSTRIAL STANDARD
Surface Color:
Any Color
Rated Voltage:
440V Volt (V)
Frequency (MHz):
50 Hertz (HZ)
Maximum Output Current:
6300A Ampere (amp)
Dimension(L*W*H):
1200 X 300 X 500 Millimeter (mm)
Warranty:
1 YEAR
Contact Person
C-3, NEW SUBHAS NAGAR, RAMESHWAR MAIN ROAD, NEAR ATIKA BSNL OFFICE, DHEBAR ROAD, ATIKA RAILWAY CROSSING,
An Elevator Control Panel is a system to control the elevators either manual or automatic. The controller usually tune down the voltage between 12V to 24V to the controlling system, Only the motor needs 3-phase power supply. The low voltage power supply is for the controlling component and the fixtures to control the elevator (except the items mentioned above, they use the single phase power supply) here below type of elevator panel.
| Cover Material: | Cold Rolled Steel |
| Thickness: | 1.6 TO 3.0 Millimeter (mm) |
| Rated Operation Voltage: | 440V |
| Rated Current: | 200A Ampere (amp) |
| Rated Insulation Voltage: | 8 KV |
| Way: | SINGLE DOOR ONE WAY |
| Base Material: | Cold Rolled Steel |
| Protection Level: | IP55 |
| Product Type: | Electric Panel |
| Material: | Cold Rolled Steel |
| Surface Finish: | Powder Coated |
| Standard: | INDUSTRIAL STANDARD |
| Surface Color: | Any Color |
| Rated Voltage: | 440V Volt (V) |
| Frequency (MHz): | 50 Hertz (HZ) |
| Maximum Output Current: | 6300A Ampere (amp) |
| Dimension(L*W*H): | 1200 X 300 X 500 Millimeter (mm) |
| Warranty: | 1 YEAR |
Contact Now
Company Profile