Product Overview
Our range of Mullite Sand is aluminum silicate refractory materials, normally used in stainless steel precision casting technology, Refractoriness around 1750 degrees, Mullite sand content more aluminum and lower iron to show that the quality is more better, content lower dust to show that the quality is more better. Mullite sand is made by kaolin through high heat sintering, Mullite sand origin is mainly distributed in the zhangqiu shandong and north of anhui and so on. Mullite sand general type are 8-16 orders, 16-30 mesh, 30-60 mesh, 60-80 mesh, 80-120 mesh; Mullite powder type are 200 mesh,300 mesh, etc. In the precision casting process, General surface plasma, zirconium powder:325 mesh + silicon sol sand: zirconium sand 120 mesh Back layer pulp: 325 mesh + silicon sol + mo to powder 200 mesh sand: mullite sand 30 to 60 mesh Reinforcement layer:mo to powder 200 mesh + colloidal silica sand: mullite sand 16-30 eyes Sealing pulp:mo to powder 200 mesh + silicon sol General chemical ingredients: 46%-Al2O3-42%, 53%-SiO2-51%, 1.2-Fe2O31-1.5%, Na2O+K2O-0.3%, CaO+MgO2-0.6%, TiO2-0.1%. Physical index: Density-2.5g/cm3, Proportion -2.6g/cm3, Water content - 0.03%, Refractoriness-1750 degree, Heat decrement-0.3-0.4%, Dust-0.01-0.03%i PH 7-9,hardness -8.0Mpa. Advantages: Pouring casting, Easy to shell, Ametabolic, not easy to reduced scale, bright and clean, high yield.
Our range of Mullite Sand is aluminum silicate refractory materials, normally used in stainless steel precision casting technology, Refractoriness around 1750 degrees, Mullite sand content more aluminum and lower iron to show that the quality is more better, content lower dust to show that the quality is more better. Mullite sand is made by kaolin through high heat sintering, Mullite sand origin is mainly distributed in the zhangqiu shandong and north of anhui and so on. Mullite sand general type are 8-16 orders, 16-30 mesh, 30-60 mesh, 60-80 mesh, 80-120 mesh; Mullite powder type are 200 mesh,300 mesh, etc. In the precision casting process, General surface plasma, zirconium powder:325 mesh + silicon sol sand: zirconium sand 120 mesh Back layer pulp: 325 mesh + silicon sol + mo to powder 200 mesh sand: mullite sand 30 to 60 mesh Reinforcement layer:mo to powder 200 mesh + colloidal silica sand: mullite sand 16-30 eyes Sealing pulp:mo to powder 200 mesh + silicon sol General chemical ingredients: 46%-Al2O3-42%, 53%-SiO2-51%, 1.2-Fe2O31-1.5%, Na2O+K2O-0.3%, CaO+MgO2-0.6%, TiO2-0.1%. Physical index: Density-2.5g/cm3, Proportion -2.6g/cm3, Water content - 0.03%, Refractoriness-1750 degree, Heat decrement-0.3-0.4%, Dust-0.01-0.03%i PH 7-9,hardness -8.0Mpa. Advantages: Pouring casting, Easy to shell, Ametabolic, not easy to reduced scale, bright and clean, high yield.
Contact Now