MgO %:
12%
Fineness:
Ultra Fine
Bending Strength:
33 Mpa
Compressive Strength:
33-35 Megapascals (MPa )
SO3 %:
3.5%
Color:
Grey
Initial Setting Time:
1 Hours
Weight:
50 Kilograms (kg)
Cement Raw Material:
Other
Cement Type:
Ordinary Silicate Cement
Sand Type:
Natural Sand
Sand Fineness:
Ultra-Fine
Hardening Feature:
Rapid Hardening
Heat of Hydration:
Low Heat
Product Strength Grade:
43
Feature:
Expansive, Volume stability, Corrosion Resistance, Acid-Proof, Radiation-Resistant, Sulfate Resistant
This cement made by heating limestone, clay, and water together in the presence of small amounts of SO3 3.5%, MgO 12% unreacted calcium sulfate called gypsum. Portland cement is a rapid hardening, lightweight, high strength, and durable cement. Its binding strength is 33 Mpa. Its color is grey. It is well suited for use in areas where fast strength development is required, such as underwater construction. This is commonly used for plastering and stucco finishes on exterior surfaces. The ratio of these compounds determines the strength, low-heat, water resistance, and durability of the end product. It comes in 50 kg sack.
| MgO %: | 12% |
| Fineness: | Ultra Fine |
| Bending Strength: | 33 Mpa |
| Compressive Strength: | 33-35 Megapascals (MPa ) |
| SO3 %: | 3.5% |
| Color: | Grey |
| Initial Setting Time: | 1 Hours |
| Weight: | 50 Kilograms (kg) |
| Cement Raw Material: | Other |
| Cement Type: | Ordinary Silicate Cement |
| Sand Type: | Natural Sand |
| Sand Fineness: | Ultra-Fine |
| Hardening Feature: | Rapid Hardening |
| Heat of Hydration: | Low Heat |
| Product Strength Grade: | 43 |
| Feature: | Expansive, Volume stability, Corrosion Resistance, Acid-Proof, Radiation-Resistant, Sulfate Resistant |
Contact Now
