Product Overview
We are offering our customers a wide range of High Density Polyethylene (HDPE), which are available following Specifications :- Density g /c m A : 0.950 Melt Mass-Flow Rate(MFR) g /10min : 0.62 Elongation st Break % min : 700 Tensile Stress at Yield kg/ cm2 : 240 Tensile Stress at Break kg/ cm2 : 420 Tensile Strain at Break % : 450 Flexural Modulus kg/ cm2 : 8500 Durometer Hardness(D Scale, Compression Molded) : 63 Shore Hardness(Shore D, Compression Molded) : 63 Brittle Temperature(Procedure A) : -76.0 Brittleness temperature : -76.0 Vicat Softening Point : 253 Vicat Softening Temperature : 253 Peak Crystallization Temperature : 268 Packing 25kg /polypropylene woven HDPE is suitable for many plastic molding methods. Blow molding can be used for making various types of bottles, cans and industrial tanks and barrels. Injection molding is used for making various containers and goods of daily use, such as basins, barrels and baskets and furniture. Extrusion molding is used for making pipes, strapping tapes, fibers and single filaments and can also be used for making wires & cables covering materials and synthetic paper. After a large amount of inorganic filler is added, HDPE can also be used as an alternative to timber and cardboards for making calcium plastic packing containers, furniture, doors and windows.
Contact Person
Rm C1209, Building 5, Glod Piazza, No.155 Jinzhai Road, Shushan District,
We are offering our customers a wide range of High Density Polyethylene (HDPE), which are available following Specifications :- Density g /c m A : 0.950 Melt Mass-Flow Rate(MFR) g /10min : 0.62 Elongation st Break % min : 700 Tensile Stress at Yield kg/ cm2 : 240 Tensile Stress at Break kg/ cm2 : 420 Tensile Strain at Break % : 450 Flexural Modulus kg/ cm2 : 8500 Durometer Hardness(D Scale, Compression Molded) : 63 Shore Hardness(Shore D, Compression Molded) : 63 Brittle Temperature(Procedure A) : -76.0 Brittleness temperature : -76.0 Vicat Softening Point : 253 Vicat Softening Temperature : 253 Peak Crystallization Temperature : 268 Packing 25kg /polypropylene woven HDPE is suitable for many plastic molding methods. Blow molding can be used for making various types of bottles, cans and industrial tanks and barrels. Injection molding is used for making various containers and goods of daily use, such as basins, barrels and baskets and furniture. Extrusion molding is used for making pipes, strapping tapes, fibers and single filaments and can also be used for making wires & cables covering materials and synthetic paper. After a large amount of inorganic filler is added, HDPE can also be used as an alternative to timber and cardboards for making calcium plastic packing containers, furniture, doors and windows.
Contact Now
Company Profile