Product Overview
Following Details of Hot Melt Adhesive : a.Construction glue for baby diaper and sanitary b.Position glue for sanitary c.Elastic glue for baby diaper FEATURES : Construction adhesive for disposable hygiene products. Pressure sensitive adhesive with excellent adhesion to PE and NW. i May be applied by spray or multibead, or slot i Transparent when coated i Low odor i Light color i Low viscosity TECHNICAL PROPERTIES : Brookfield Viscosity(ASTM D3236) R&B Softening Point(ASTM E28) About 2100 mPa.si 160a About 69a Gardener Color (ASTM D36) Suggested Running Temp About 3.0 150--165a STORAGE : Can be stored 12 months in a clean dry place, in its original package at an average temperature of 25a or below. Storage temperature should not exceed 35a i CLEAN-UP Mineral oil or paraffin wax, not to exceed flash point as MSDS, followed by a thorough purge with the adhesive itself PACKAGING Available in film wrapped block (about 1 kg or 2kg). SAFETY MSDS should be consulted for proper handling before use. Wear safety groves and goggles when handling molten adhesive
Following Details of Hot Melt Adhesive : a.Construction glue for baby diaper and sanitary b.Position glue for sanitary c.Elastic glue for baby diaper FEATURES : Construction adhesive for disposable hygiene products. Pressure sensitive adhesive with excellent adhesion to PE and NW. i May be applied by spray or multibead, or slot i Transparent when coated i Low odor i Light color i Low viscosity TECHNICAL PROPERTIES : Brookfield Viscosity(ASTM D3236) R&B Softening Point(ASTM E28) About 2100 mPa.si 160a About 69a Gardener Color (ASTM D36) Suggested Running Temp About 3.0 150--165a STORAGE : Can be stored 12 months in a clean dry place, in its original package at an average temperature of 25a or below. Storage temperature should not exceed 35a i CLEAN-UP Mineral oil or paraffin wax, not to exceed flash point as MSDS, followed by a thorough purge with the adhesive itself PACKAGING Available in film wrapped block (about 1 kg or 2kg). SAFETY MSDS should be consulted for proper handling before use. Wear safety groves and goggles when handling molten adhesive
Contact Now
Company Profile