Product Overview
Meproche rust convertor is efficiently used to remove rust from stored steel and old rusted steel already erected (whether in RCC or otherwise). With the chemical Meproche C-21 rust convertor, pitted surfaces can be converted into a protective coat. It is supplied in two packs. Our company is offering quality Meproche C-21 rust convertor, that is based on polyhydroxy organic compounds. A surface treated with MEPROCHE C 21 accepts primers and paint fast. It increases adherence of primers and paints and thus improves the life of paints. It covers approximately 70/75 square meter per Kg. Method of application: * Mix 50 gms of part A to 0.950 kg. of part B * Apply on the rusted surface and leave it for 4 to 6 Hrs * Remove rust by wire brush * Repeat the process if necessary The chemical converts the balance rust into a passive state thus stop further rusting. It provides temporary solution for rust prevention. It can later be painted or lined. Rubber gloves should be used while handling Meproche rust convertor as it is mildly acidic in nature. Note: The information provided is based on our experience and tests conducted by us on typical specimen. However, the actual working conditions are beyond our control and knowledge. Hence, we are not responsible for any liability for loss, damage, injury or mishap resulted.
Meproche rust convertor is efficiently used to remove rust from stored steel and old rusted steel already erected (whether in RCC or otherwise). With the chemical Meproche C-21 rust convertor, pitted surfaces can be converted into a protective coat. It is supplied in two packs. Our company is offering quality Meproche C-21 rust convertor, that is based on polyhydroxy organic compounds. A surface treated with MEPROCHE C 21 accepts primers and paint fast. It increases adherence of primers and paints and thus improves the life of paints. It covers approximately 70/75 square meter per Kg. Method of application: * Mix 50 gms of part A to 0.950 kg. of part B * Apply on the rusted surface and leave it for 4 to 6 Hrs * Remove rust by wire brush * Repeat the process if necessary The chemical converts the balance rust into a passive state thus stop further rusting. It provides temporary solution for rust prevention. It can later be painted or lined. Rubber gloves should be used while handling Meproche rust convertor as it is mildly acidic in nature. Note: The information provided is based on our experience and tests conducted by us on typical specimen. However, the actual working conditions are beyond our control and knowledge. Hence, we are not responsible for any liability for loss, damage, injury or mishap resulted.
Contact Now
Company Profile