Product Overview
Our customers can avail from us an excellent quality range of PVC Suspention Grade. Experience has shown screws normally used for injection molding of low density polyethylene to be satisfactory. Melt temperature : 150 a 200 C Mold temperature : 15 a 40 C Extrusion :- A three- zone screw with a total L/D ratio of at lease 20 is recommended. Melt temperature is, generally, in the overall range of 95 a 205 C. The melt temperature depends upon the melt index of the resin, the % vinyl acetate and the part configuration
Our customers can avail from us an excellent quality range of PVC Suspention Grade. Experience has shown screws normally used for injection molding of low density polyethylene to be satisfactory. Melt temperature : 150 a 200 C Mold temperature : 15 a 40 C Extrusion :- A three- zone screw with a total L/D ratio of at lease 20 is recommended. Melt temperature is, generally, in the overall range of 95 a 205 C. The melt temperature depends upon the melt index of the resin, the % vinyl acetate and the part configuration
Contact Now
