Aluminum Alloy Rod Continuous Casting And Rolling Line

Technical Specifications of Aluminum Alloy Rod Continuous Casting And Rolling Line :- 1. The Use and Components of the equipment The equipment is used to produce aluminum rod and Al-Mg-Si alloy rod with a high intensity and heat resistance in diameter A,9.5mm, A,12mm, A,15mm by means of continuous casting and rolling. The line is competitive with the relative international products. 2. Brief flow chart Raw materiala melting furnacea holding furnacea flow channela casting ladlea casting machinea oil hydraulic shearea initiative material feeding devicea continuous rolling milla quenching devicea pulling devicea continuous take-up (pre deformation)a coiler 3. The main technical parameters of the production line 1). Diameter of crystallizing wheel A, 1500mm 2). Outlet ingot speed 8 -12m/min 3). Cross-sectional area of ingot casting 2300mm2 4). Final rolling speed 4-6.2m/min 5). Production capacity 2.7-4.5t/h 6). Diameter of outlet rod A,9.5mm, A,12mm 7). Actuating motor for crystallizing wheel Y132M1-6 4kW 960r/min 8). Motor for continuous rolling mill Z4-355-32 355kW 600r/min (with speed test) 9). No.of rolling stand 14 stands