Pre-Engineered Building (PEB)

We are engaged in offering excellent quality Pre-Engineered Building (PEB) to our valuable clients. In conventional steel buildings, mill-produced hot rolled sections (beams and columns) are used. The size of each member is selected on the basis of the maximum internal stress in the member. Since a hot rolled section has a constant depth, many parts of the member (represented by the hatched area), in areas of low internal stresses, are in excess of design requirements. Frames of pre-engineered buildings are made from an extensive inventory of standard steel plates stocked by the PEB manufacturer. Pre-Engineered Building (PEB) frames are normally tapered and often have flanges and webs of variable thicknesses along the individual members. The frame geometry matches the shape of the internal stress (bending moment) diagram thus optimizing material usage and reducing the total weight of the structure. Frames of Pre-Engineered Building (PEB) are made from an extensive inventory of standard steel plates stocked by the PEB manufacturer. PEB frames are normally tapered and often have flanges and webs of variable thicknesses along the individual members. The frame geometry matches the shape of the internal stress (bending moment) diagram thus optimizing material usage and reducing the total weight of the structure.