Product Overview
Gas Fume Hood Outlet Nozzle Technical Specification Dry services valves for water, Oxygen and technical gases (99% clean) can be used where a higher degree of cleanliness is required. The design and manufacturing are adapted to Oxygen services meaning that presence of mineral oils and gases are minimized. The fitting surface treated with P.U. METAL COAT. which is highly resistant to most chemicals, UV fading and heat. Innovative Lab fitting are made of FORGE BRASS CASTING. typical media for this range are oxygen, water and all non-burning, non-corrsive and non-toxic 4.0 gases such as N2 and he. Innovative lab fitting are designed for R&D, morden laboratory use. Every fitting is leak tested before leaving our factory.General Standard The laboratory fitting we produce are manufactured according to the following specific standard DIN 12920 Color code for fluids on operating devices of laboratory taps. DIN 12898Laboratory taps: outlet nozzles. DIN 12919 laboratory taps, connecting sleeves: tap columns, heights and flang dimensions. DIN 3537 Gas valves (LESS THAN OR EQUAL) PN 4 Requirments and test for approval of laboratory valves.Material with Service Contact MOC of valve body: Brass ForgingMOC of Spindle: Brass RodKnob: NylonSpindle Oring: NeopreneSuitable for Services like water, Gas, & VacuumTesting pressure: 15 Bar / 220 PSI.Maximum working pressure: 10 Bar / 147 PSI
Contact Person
Plot No. 83-3/5, Agrawal Industrial Estate, Mahendikuwa Road, Shahpur,
Gas Fume Hood Outlet Nozzle Technical Specification Dry services valves for water, Oxygen and technical gases (99% clean) can be used where a higher degree of cleanliness is required. The design and manufacturing are adapted to Oxygen services meaning that presence of mineral oils and gases are minimized. The fitting surface treated with P.U. METAL COAT. which is highly resistant to most chemicals, UV fading and heat. Innovative Lab fitting are made of FORGE BRASS CASTING. typical media for this range are oxygen, water and all non-burning, non-corrsive and non-toxic 4.0 gases such as N2 and he. Innovative lab fitting are designed for R&D, morden laboratory use. Every fitting is leak tested before leaving our factory.General Standard The laboratory fitting we produce are manufactured according to the following specific standard DIN 12920 Color code for fluids on operating devices of laboratory taps. DIN 12898Laboratory taps: outlet nozzles. DIN 12919 laboratory taps, connecting sleeves: tap columns, heights and flang dimensions. DIN 3537 Gas valves (LESS THAN OR EQUAL) PN 4 Requirments and test for approval of laboratory valves.Material with Service Contact MOC of valve body: Brass ForgingMOC of Spindle: Brass RodKnob: NylonSpindle Oring: NeopreneSuitable for Services like water, Gas, & VacuumTesting pressure: 15 Bar / 220 PSI.Maximum working pressure: 10 Bar / 147 PSI
Contact Now
Company Profile