Product Overview
With the aid of our rich industry expertise, we have been able to manufacture and supply superior grade Action Leather Safety Boots. These boots are made by our professionals using high quality leather and resin blends in our state-of-the-art manufacturing plant. After manufacturing, quality controllers working at our end check these shoes on various quality parameters so as to remove any of the prevailing defect. Adding to this, our packaging team delivers these boots at clients specified locations within said time frame. Action Leather Safety Boots offered by us have following quality features:Optimum strengthComfortable to wearSeamless finishPerfect stitchingOther Details:Action Leather Safety Boots Technical Information for Customer Awareness: Standards Safety, Protective and Occupational Shoes for industrial purpose are tested according to different standards. We produce footwear according to the following European and Indian standards. ENISO 20345/EN 345-I Safety Shoes with Steel/Composite/Aluminium Toe Caps which resist test force of 200 Joules. ENISO 20346/EN 346-I Protective Shoes with Steel/Composite/Aluminium Toe Caps which resist test force of 100 Joules. ENISO 20347/EN 347-I Occupational Shoes without Toe Cap, but with skid resistant, antistatic or other similar features. IS 15298:2002/ISO 8782-2:1998 Safety, Protective and Occupational footwear for professional use. Classification Class 1: Foot wear made of leather including all-rubber or all polymeric footwear. Class II : All rubber (i.e. entirely vulcanised (I.e. entirely moulded) footwear Additional Marking A - Antistatic footwear C -Conductive foot wear Cl- Cold Insulation E- Energy absorption in heel area HI- Heat Insulation P Penetration resistant HRO- Thermal behavior of sole Slip Resistance of Safety Protective and Occupational Shoes In the new European standard, following three slip resistant limits are defined since beginning of 2008 and as per new standard the footwear must fulfill one of these three requirements SRA: Slip resistance on floors with ceramic tiles with SLS(Sodium Laurylether Sulphate) solution. SRB : Slip resistance on steel floor with glycerol. SRC - Slip resistance on floor with ceramic tiles with SIS and on steel floor with glycerol (SRA + SRB) Identification Marks For right and easy selection of footwear. we have the following identification marks
With the aid of our rich industry expertise, we have been able to manufacture and supply superior grade Action Leather Safety Boots. These boots are made by our professionals using high quality leather and resin blends in our state-of-the-art manufacturing plant. After manufacturing, quality controllers working at our end check these shoes on various quality parameters so as to remove any of the prevailing defect. Adding to this, our packaging team delivers these boots at clients specified locations within said time frame. Action Leather Safety Boots offered by us have following quality features:Optimum strengthComfortable to wearSeamless finishPerfect stitchingOther Details:Action Leather Safety Boots Technical Information for Customer Awareness: Standards Safety, Protective and Occupational Shoes for industrial purpose are tested according to different standards. We produce footwear according to the following European and Indian standards. ENISO 20345/EN 345-I Safety Shoes with Steel/Composite/Aluminium Toe Caps which resist test force of 200 Joules. ENISO 20346/EN 346-I Protective Shoes with Steel/Composite/Aluminium Toe Caps which resist test force of 100 Joules. ENISO 20347/EN 347-I Occupational Shoes without Toe Cap, but with skid resistant, antistatic or other similar features. IS 15298:2002/ISO 8782-2:1998 Safety, Protective and Occupational footwear for professional use. Classification Class 1: Foot wear made of leather including all-rubber or all polymeric footwear. Class II : All rubber (i.e. entirely vulcanised (I.e. entirely moulded) footwear Additional Marking A - Antistatic footwear C -Conductive foot wear Cl- Cold Insulation E- Energy absorption in heel area HI- Heat Insulation P Penetration resistant HRO- Thermal behavior of sole Slip Resistance of Safety Protective and Occupational Shoes In the new European standard, following three slip resistant limits are defined since beginning of 2008 and as per new standard the footwear must fulfill one of these three requirements SRA: Slip resistance on floors with ceramic tiles with SLS(Sodium Laurylether Sulphate) solution. SRB : Slip resistance on steel floor with glycerol. SRC - Slip resistance on floor with ceramic tiles with SIS and on steel floor with glycerol (SRA + SRB) Identification Marks For right and easy selection of footwear. we have the following identification marks
Contact Now
Company Profile